ELECTRIC EQUIPMENT

1. Home
2. PRODUCT
3. ELECTRIC EQUIPMENT

• AUTOMATIC BUS TRANSFER DIVICE

  

  *JABT-A1

  AUTOMATIC BUS TRANSFER

  ABT automatically converts between normal power and emergency(alternative) power, and can be converted into manual through an auto/manual conversion switch. Its conversion can be tested with a test switch as well.

  Voltage	AC 440V, 220V, 115V 3∅
  Capacity range	Up to 600A
  IP Grade	IP23 / 44

• MANUAL BUS TRANSFER DEVICE

  

  *JMBT-M1

  MANUAL BUS TRANSFER

  MBT manually converts between normal power and emergency(alternative) power, and prevents simultaneous inputs through a mechanical interlock device, and enables remote signal contact outputs.

  Voltage	AC 440V, 3∅ , 60Hz
  Capacity range	Up to 400A
  IP Grade	IP23 / 44

• DISTRIBUTION BOARD

  

  *JDB

  DISTRIBUTION BOARD

  Distribution board is for AC power supply required in certain area. It is to block current effectively at electric current breakdown and for proper supply of electric power.

  Voltage	AC 690V, 440V, 220V
  IP Grade	IP23 / 44

• STARTER

  

  *JMS

  STARTER

  Starter is a panel to control and operate motor which is a driving force for land and vessel auxiliary equipment. It is produced good enough to control all the required functions by the auxiliary equipment.

  Type	Direct-on-line (DOL) starting Y-△ starting Soft starter starting
  IP Grade	IP23 / 44

• NAVIGATION LIGHT CONTROL PANEL

  

  *JNLCP

  NAVIGATION LIGHT CONTROL

  Navigation light panel is a device to control marine navigation, etc., and if the primary filament or fuse of the navigation light is disconnected during use, then it automatically convents into a secondary filament to emit a visible and audible alarm.

  Voltage	AC 115V, 3∅, 60Hz
  IP Grade	IP23 / 44

• SIGNAL LIGHT CONTROL PANEL

  

  *JSLCP

  SIGNAL LIGHT CONTROL

  Signal light control panel is a device to control marine signals, and has functions such as on/off, flashing and brightness-adjustment of various signal lamps.

  Voltage	AC 115V, 3∅, 60Hz
  IP Grade	IP23 / 44

• CASUALTY POWER TERMINAL

  

  *JKNCPT

  EMERGENGY POWER SOURCE CONNECTION

  Casualty power terminal is a device to connect the emergency power, and has plugs and caps as additional components.

  Type	Alive Terminal Riser Terminal (Bottom/Top/Portable)
  Voltage	AC 440V, 3∅, 60Hz
  Capacity	200A

• PORTABLE BATTERY CHARGER

  

  *JPBC

  BATTERY CHARGER

  Portable battery charger is a charger made to be convenient to move, and is made to be suitable for use as emergency charging.

  Input voltage	AC 220V 1∅ 60Hz
  Output voltage	DC 6V, 12V, 24V
  Output current	30A, 50A

• RECTIFIER

  

  *JR

  POWER SOURCE SUPPLY

  Rectifier is a device to supply good quality of DC power to equipment by converting AC power into DC power, and is made in various specifications required as well as the basic specification.

  Input voltage	AC 115V 1∅ 60Hz
  Output voltage	DC 30V
  Output current	10A

• POWER SUPPLY VRC-946K

  

  *JPSVRC

  POWER SOURCE SUPPLY

  Power supply for VRC-946K can supply power and generate DC (direct current) for the use of telecommunication system, VRC-946K.

  Input voltage	AC 110V, 220V / DC 24V
  Output voltage	DC 24V
  Output current	15A

• SHORE POWER CONNECTION BOX

  

  *JSPCB

  SHORE POWER CONNECTION

  Shore connection box is a device to execute land-power connection and other-ship-power connection, and has watt-hour meters, phase/reverse phase detectors, terminal bolt tightening tools, etc.

  Voltage	AC 440V, 3∅, 60Hz
  Capacity	3∅ 225Ax1 , 3∅100Ax1

• CONNECTION BOX

  

  *JCB

  POWER SOURCE AND SIGNAL CONNECTION

  Connection box is a box to connect the power and signal line mutually, and can be made in various sizes according to the request from customers. The cable gland and clamp are connected depending on the waterproof or drip-proof type, and there is a terminal board inside.

  Type	JCB, JJB
  IP Grade	IP 44/ 56 / 66